Trade Adverts

Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the details…
Read more...
We are selling unique items for the home workshop like division plates that have 127 & 25 holes in them for direct indexing. We also stock some custom gears for the Myford lathes.You can see more of our stuff at our web site here ......
Read more...
...
STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.

We also make other…
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours alloys using the lost wax process, ideal for the model engineer and restorer. Any enquiries and more details can be found on my web site. www.abbeycasting.c......
Read more...
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details. ...
Read more...
Call Steve Cox on 07836 736496 or email for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using flatbed Transit with rear mounted…
Read more...
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs…
Read more...
Home Workshop

Agora Latest Posts

by Philip Robinson
15.04.2014 09:34:06
by Bhagwati Ben
14.04.2014 14:01:20
by Ashley Slater
13.04.2014 14:01:55
by Nick Moore
12.04.2014 14:35:17
by Bhagwati Ben
11.04.2014 14:03:10
by Dave Smith
01.04.2014 10:07:34
Powered by jVitals
 

Advert Search


Statistics Count

Total Visitors:2,468,485
Vistors a Month:42,549
Vistors a day:1,419

Stolen Engine

Details:
This 5” gauge Simplex loco was stolen from a locked garage sometime between February 22 and March 28. Owned by a Mid Cheshire Society of Model Engineers member.
It’s numbered 7582 on the cab, and boiler test stamp above fire-hole door N3310029
Loco is painted in Brunswick Green with orange lining. It’s a good, trouble-free runner. It has one injector, an axle pump and hand-pump in right hand tank.
Key learning point - There was no sign of a break-in, but contractors had recently been on-site!
The owner would be most grateful for any information. Please contact Cheshire Police or Mid Cheshire Society of Model Engineers via the undersigned.


Contact:
Geoff Johnson
UK
01829 760422
email

defaultAll Adsrss

We have 179 adverts and 34 completed so far in April 2014
141 For sale adverts and of these 33 have sold.
26 Wanted adverts and of these none found what they needed.
7 Information adverts and 5 Thank you posts.


Last approved: Friday 18th April 2014 at 10:57
Please note that this the date that we last checked the adverts and not the date of the latest adverts, resubmitted adverts could have a date newer than this date as they don't need checking

Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
We are selling unique items for the home workshop like division plates that have 127 & 25 holes in them for direct indexing. We also stock some custom gears for the Myford lathes.
You can see more of our stuff at our web site here
Read more...

Wanted: Brown & Sharpe No 9 Taper

Sat 12th Apr '14

Advert ID: 19028

Tools
See all ads from Donald Hamilton
Details:
Hi, Does anyone have any redundant or surplus Brown & Sharpe No 9 Taper tooling, (Milling chucks adaptors etc) that they would like to part with?

If so please get in touch.
Thank you
Contact:
Donald Hamilton
Bristol
BS8
UK
0117 973 8259
email

For Sale: Myford Super 7 T-Link Type Belts

Sat 12th Apr '14

Advert ID: 19027

Tools
Details:
A section T-link type belt for a Myford Super 7 to fit between spindle and countershaft.
This belt is new and unused

Z section T-link type belt to fit between motor and countershaft. This belt has been used for about a month.

Z section Optibelt V belt to fit between countershaft and motor. This is used, but in good condition.

I bought these belts many years ago as a set when I had a Super 7. They are now no longer needed.
£18 for all 3 belts + £2.80 postage, or collect.
Terms:
Price: £18.00
Postage: £2.80
Collection or Post
Contact:
Mike Stratton
Stockport
SK22
UK
email
Myford Super 7 T-Link Type BeltsMyford Super 7 T-Link Type BeltsMyford Super 7 T-Link Type Belts

For Sale: Burnerd 4 Jaw Chuck

Sat 12th Apr '14

Advert ID: 19026

Tools
Details:
Still more from clearout Burnerd 41/2" 114MM 4Jaw Independent Chuck fitted with backplate threaded 1&1/8.x 12 tpi (Myford)with key and original box.
Unused condition.£60 ono.Postage high due to weight i'm afraid.
Terms:
Price: £60.00
Postage: £8.00
Collection or Post
Contact:
Colin Wilson
Cromer/Norwich
NR11
UK
01263720528
email
Burnerd 4 Jaw ChuckBurnerd 4 Jaw Chuck

For Sale: Lathe Bits

Sat 12th Apr '14

Advert ID: 19024

Tools
Details:
More from my clearout.
Set of 83/8" square Carbide Tipped lathe bits.Have been used as seen by the paint,but still good with pleanty of "meat" left. £12
Terms:
Price: £12.00
Postage: £4.00
Collection or Post
Contact:
Colin Wilson
Cromer/Norwich
NR11
UK
01263720528
email
Lathe BitsLathe Bits

For Sale: 1/3HP 230V Electric Motor

Sat 12th Apr '14

Advert ID: 19023

General
Details:
SPECMAC 1/3HP 230/240v, 1425rpm, single phase ball bearing reversible motor.
5/8" shaft.

Included, should you want it, is 3 speed pulley with clutch/brake assembly....
£30
Collection only pls.
Terms:
Price: £30.00
Collection Only
Contact:
Jack Abbott
Bolton
BL7
UK
email
1/3HP 230V Electric Motor1/3HP 230V Electric Motor1/3HP 230V Electric Motor

For Sale: 0-1 inch Micrometer

Sat 12th Apr '14

Advert ID: 19022

Tools
Details:
A very good quality 0-1 inch Tesa-style micrometer with tungsten carbide measuring faces. This is a very nice micrometer! I am reluctant to sell this one, but I have a excess of micrometers. There are two faults: the locking lever is missing and the paint work has worn off in a couple of small patches. It comes with a foam-lined box. Calibrated by Micron Metrology in 2005. It was previously used for aircraft component manufacturing.
Terms:
Price: £10.00
Collection or Post
Contact:
Mike Godfrey
Fleet
GU51
UK
07749235351
email
0-1 inch Micrometer0-1 inch Micrometer
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

For Sale: 0-1 inch Moore and Wright Micrometer

Sat 12th Apr '14

Advert ID: 19021

Tools
Details:
Immaculate condition 0-1 inch micrometer. Includes case.
Terms:
Price: £8.00
Collection or Post
Contact:
Mike Godfrey
Fleet
GU51
UK
07749235351
email
0-1 inch Moore and Wright Micrometer

For Sale: A 1-2 inch Moore and Wright Micrometer

Sat 12th Apr '14

Advert ID: 19020

Tools
Details:
Immaculate condition 1 to 2 inch micrometer with case. Everything works perfectly.
Terms:
Price: £15.00
Collection or Post
Contact:
Mike Godfrey
Fleet
GU51
UK
07749235351
email
A 1-2 inch Moore and Wright Micrometer

For Sale: Macallister copy woodworking lathe

Fri 11th Apr '14

Advert ID: 19019

Tools
Details:
I'm selling this lathe because I've recently upgraded it and need the space. Details are Model No.COD450CL, 550w single phase motor, bed length 1000 mm( 40")c/w maker's face plate and spur. Price £50.00 for quick sale. No hand tools. Please contact me to see the lathe working or to get more info. Will have to be collected by small van but will fit into a car,help will be given on site to strip it off the stand.
Terms:
Price: £50.00
Collection Only
Contact:
Bill Martin
Edinburgh
EH4
UK
0131 476 0354
email
Macallister copy woodworking lathe

For Sale: seamless copper tube

Fri 11th Apr '14

Advert ID: 19018

Materials
Details:
Found during a workshop clearance. Details are 80mm o/d x 250mm long which I think is 16 SWG thick. A bit grubby with lying around but otherwise OK. £13.00 which includes p&p to anywhere in the UK
Terms:
Price: £13.00
Collection or Post
Contact:
Eddie Martin
Broxburn
EH52
UK
01506 852457
email

For Sale: Hand Guillotine

Fri 11th Apr '14

Advert ID: 19016

Tools
Details:
Hand Guillotine roughly 9" great for chopping bar to rough lengths

had very little use make me an offer
Terms:
Price: £50.00
Collection Only
Contact:
Kev Sissons
York
yo43
UK
07742355807
email
Hand Guillotine

For Sale: Mechanical Power Hacksaw

Fri 11th Apr '14

Advert ID: 19015

Tools
Details:
Home made power hacksaw works well.
12" x1" or 12"x1/2" blades

we used it to chop lots of the bar stock up into manageable bit no problems
Terms:
Price: £50.00
Collection Only
Contact:
Kevin Sissons
York
YO43
UK
07742355807
email
Mechanical Power Hacksaw


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...

For Sale: Myford ML7 lathe

Fri 11th Apr '14

Advert ID: 19014

Tools
Details:
Myford ML 7 Lathe in good condition, little use for last 3yrs due to ill health

lathe has motor with stop start buttons. tail stock. multitool post.

all the usual bits. I have put a pic on that is poor as we had moved loads of tools on to the lathe if you want a better pic email me.

there are loads of bits for this from chucks to tooling.

I have limited knowledge re the lathe but could answer your questions.

I will take offers that are sensible, you are welcome to come look and see whats what and what other bits there are.
Terms:
Price: £650.00
Collection Only
Contact:
Kevin Sissons
YORK
yo43
UK
07742355807
email
Myford ML7 latheMyford ML7 latheMyford ML7 latheMyford ML7 lathe

For Sale: Warco Turret Miller with Autofeed

Fri 11th Apr '14

Advert ID: 19013

Tools
Details:
Warco Turret Miller with auto feed, cabinet and optional tray, has had light use drilling mainly.

this machine is in good condition there is a number of angle plates collets R8 chucks etc that for the right price will go with it as we are clearing my Dads workshop. looking for sensible offers
email me for pics as couldn't get into workshop at the time.
from Warco site

Featuring extremely robust construction, the VMC Turret Mill is a popular choice with experienced engineers who demand precision milling without compromise. With many features,

Features include:
�Nine speeds
�Vee belt drive
�Includes a halogen low-volt lighting solution
�Head tilts left to right, calibrated to 45°
�360° rotation on horizontal axis
�One shot lubrication system to slideways and leadscrews to ensure prolonged machine life
�Optional spindle taper, R8 or 3MT
�Choice of either metric or imperial leadscrews
�Traditional design with elevating knee, supported on double dovetail vee ways to ensure positive alignment
�Tapered gibs to X, Y and Z axes
�Rack and pinion feed and calibrated fine feed to quill
�Locks to X, Y and Z axes
�Interlock belt guard
Terms:
Price: £1,000.00
Collection Only
Contact:
Kev Sissons
YORK
yo43
UK
07742355807
email
Warco Turret Miller with AutofeedWarco Turret Miller with AutofeedWarco Turret Miller with AutofeedWarco Turret Miller with Autofeed

Wanted: No Volt Switch - 240v

Fri 11th Apr '14

Advert ID: 19012

Tools
Details:
Does anyone have a 'No Volt' starter switch that is surplus to requirements please. I am looking for a switch to use with a 240v 1/2HP [.37kW] motor.

Cosmetic condition umimportnat, as long as it works reliably.
Contact:
Stuart
Swindon
UK
email

For Sale: Record 23 Vise

Fri 11th Apr '14

Advert ID: 19010

Tools
See all ads from Norman Bailey
Details:
Used but in good working order.
Record 23 as used in industrial fitting and training workshops.
Hard and soft jaws. Useful quick release function.
Collection only due to weight!
Listed in Machine Mart at £359 + VAT.
Bargain at £75-00
Terms:
Price: £75.00
Collection Only
Contact:
Norman Bailey
Warrington
WA5
UK
07775 624582
email
Record 23 Vise

Wanted: Woven/Belata flat belt

Fri 11th Apr '14

Advert ID: 19008

Materials
Details:
For use as an external contracting brake on a child's garden buggy.

Thickness approx 3/16".
Minimum width 13/8"
Minimum length 24"

Bob Kellock 01747 870318
Contact:
Bob Kellock
Salisbury
SP3
UK
email

For Sale: Books

Fri 11th Apr '14

Advert ID: 19007

Books/Magazines
Details:
Original Pultra Micro lathe operation and maintenance manual for models 1750,1770,& 1590
I have 2 of these at £4.00 each + postage

Spare parts and general assembly booklets for series 1750 & 1770
I have 2 of these at £ 2.50 each + postage

Model Traction Engine Construction
By John Haining £4.00 + postage

Building the Allchin by W.J. Hughes
£7.00 + postage
Terms:
Price: Multiple
Post Only
Contact:
Paul Hardy
Buntingford Herts
SG9
UK
email
We are selling unique items for the home workshop like division plates that have 127 & 25 holes in them for direct indexing. We also stock some custom gears for the Myford lathes.
You can see more of our stuff at our web site here
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...

For Sale: brazing hearth with small conpresor

Fri 11th Apr '14

Advert ID: 19006

Tools
See all ads from Tony Imeson
Details:
Details:
I no longer have use for this so it is looking for a new home The compressor works fine and is single phase (I use the compressor to test small steam engines)There is no torch with it. for collection only open to offers




Contact:
Tony Imeson
bradford
bd4o
UK
01274687130
email
Terms:
Price: £50.00
Collection Only
Contact:
Tony Imeson
bradford
bd4o
UK
01274687130
email
brazing hearth with small conpresorbrazing hearth with small conpresor

For Sale: Smart Brown

Fri 11th Apr '14

Advert ID: 19005

Tools
Details:
Smart Brown mod a toolroom lathe good condition with taper turning , steadies , full set 64th collets , full set internal external step or bell chucks , 2 num 3 jaw chucks , 4 jaw chuck , faceplate , change wheels for metric imperial module threads separate cabinet for accessories
Terms:
Price: £800.00
Collection Only
Contact:
Steve lewis
Chester
CH64
UK
07931933597
email

Wanted: 5" gauge Britannia Perrier drawings.

Fri 11th Apr '14

Advert ID: 19003

Models
See all ads from Ken Shipley
Details:
Hi All,

If anyone has a readable set of Perrier drawings for a 5" Brit they no longer require I would be happy to give them a good home for a fee to be arranged. I do have a set but they are quite faded now.

Thanking you in anticipation.

Best regards Ken Shipley.
Contact:
Ken Shipley
Bingley
BD16
UK
01274511425
email

For Sale: 5 inch gauge wheel castings

Fri 11th Apr '14

Advert ID: 19000

Models
Details:
as per photo
wheel castings
61/2 inch over rims
63/8 inch over tread
18 spoke
d132
casting number on back
offers
Terms:
Price: Free
Postage: £10.00
Delivery Only
Contact:
j malcolm price
west yorkshire
wf6
UK
01924 897660
email

For Sale: 5 INCE Gauge loco frames

Fri 11th Apr '14

Advert ID: 18999

Models
Details:
B1 Srpingbok loco frames for sale
most holes drilled
offers please
jubilee loco frames for sale
maybe royal scot not sure most holes drilled
offers please
some other bits avaiable
tel 01924 897660
Terms:
Price: Free
Postage: Free
Collection Only
Contact:
malcolm price
west yorkshire
wf6
UK
01924 897660
email

For Sale: Various fasteners & fittings for aluminium profile

Fri 11th Apr '14

Advert ID: 18998

Materials
See all ads from Sam Rogers
Details:
I have surplus materials from a finished project I want to sell
T bolts , flange nuts , corner fixings, lock nuts, hinges,etc
Its mostly Rexroth and still bagged.
Delivery charges would be based upon total weight of the package

Part Code - Size - Description - Price - Qty
3842502674 45x45 Black Plastic Caps (per 10) £5.00 15
3842530285 M6 T-Nut (Bag 10) £4.00 12
3842345081 M8 Flange Nuts (per 10) £2.00 32
3842528715 M8X20 T-Head Bolt (per 10) £4.00 22
3842528718 M8X25 T-Head Bolt (per 10) £4.00 23
M6 Nyloc Zinc Plated Lock nuts (Bag 10) £1.00 10
M8 Nyloc Zinc Plated Lock nuts (Bag 10) £1.00 10
M10 Nyloc Zinc Plated Lock nuts (Bag 10) £1.00 14
M12 Nyloc Zinc Plated Lock nuts (Bag 10) £1.00 21
3842530236 M10 Self-tapping Core Screw £4.00 10
90 Slot bracket £2.00 13
3842538719 45x45 Angle Plate Set £3.00 12
3842523570 M8 45xx90 Degree Set £4.00 4
3842544531 Hinges £10.00 4
3842352009 43x42 90 Degree Set (Bagged) £3.00 4
3842352009 43x42 90 Degree (corner only - un-bagged) £2.50 9

Please e-mail me for more information
Terms:
Price: £1.00
Post Only
Contact:
Sam Rogers
Kenilworth
CV8
UK
email
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...

For Sale: Clarkson Autolock

Thu 10th Apr '14

Advert ID: 18997

Tools
Details:
Clarkson Autolock, INT40 c/weight collets
imperial set; 1/4,3/8/,1/2 & 5/8
metric set; 6mm,10mm,12mm,16mm
5/8W thread.

no spanner or box i'm afraid.

price includes postage.
Terms:
Price: £70.00
Postage: Free
Collection or Post
Contact:
Damon Corbett
Sudbury
CO10
UK
01787 247886
email
Clarkson AutolockClarkson Autolock

For Sale: colchester tool post

Thu 10th Apr '14

Advert ID: 18996

Tools
Details:
Colchester indexing tool post, for a Bantam or chipmaster, i think it's missing a couple of ball bearings fot the indexing stop. i've never used it but i think everything else is there.

price includes postage
Terms:
Price: £70.00
Postage: Free
Collection or Post
Contact:
Damon Corbett
Sudbury
CO10
UK
01787 247886
email
colchester tool postcolchester tool post

For Sale: transformer & contactor

Thu 10th Apr '14

Advert ID: 18995

Materials
Details:
Transformer and contactor combination, originally used for a fan.

Transformer 100VA 415-24V
Contactor 24V 1.6-2.5A range

there are two of these, price is for each.

Price includes postage
Terms:
Price: £17.00
Postage: Free
Collection or Post
Contact:
Damon Corbett
Sudbury
CO10
UK
017876 247886
email
transformer & contactor

For Sale: osborn collet chuck

Thu 10th Apr '14

Advert ID: 18994

Tools
Details:
Osborn INT40 collet chuck, three imperial collets. 1/2, 3/8, 1/4 (will check)c/w spanner. No box i'm afraid.

postage included in price.
Terms:
Price: £26.00
Postage: Free
Collection or Post
Contact:
Damon Corbett
Sudbury
CO10
UK
01787 247886
email
osborn collet chuck

For Sale: Low voltage DC power supply parts

Thu 10th Apr '14

Advert ID: 18993

General
Details:
Parts to make a variable voltage high current DC source for anodising, battery charging , welding etc. These all come from my British made self- assembly MIG welder which I have just retired. All these parts were in perfect health – I dismantled it for other reasons.
8 amp Regavolt variable voltage transformer by Berco. £35
Bridge rectifier assembly 470 amp / 400 volt. Four diodes R6110430/R6100430. £35
Power transformer, 240 volt primary, 2 secondaries each giving 16.5v open circuit. I have no information on the transformer but it's pretty heavy duty.(Look at the secondaries on that... )(The OXO cube is included in the picture to give an idea of the size- sorry, it was the best thing I could find!)
£35, with or without the OXO.
Collection much preferred.
Terms:
Price: Multiple
Collection Only
Contact:
Henry Gillett
Purley, Surrey
CR8
UK
email
Low voltage DC power supply partsLow voltage DC power supply partsLow voltage DC power supply partsLow voltage DC power supply parts

For Sale: Eclipse E934 Magnetic Vee Block

Thu 10th Apr '14

Advert ID: 18992

Tools
See all ads from Lee Wood
Details:
This vee block has seen a bit of use and there is a small dink in one of the top vees - apart from that just minor scratches and paint wear
The vee in the bottom is in very good condition
Magnet is still really powerful and works when either the top or bottom vee is in use

Height mm 95
Length mm 100
Width mm 70

This model would cost around £300 new but because of its usage I would like £90
Delivery is included in that price
Terms:
Price: £90.00
Postage: Free
Delivery Only
Contact:
Lee Wood
Worcester
WR4
UK
email
Eclipse E934 Magnetic Vee BlockEclipse E934 Magnetic Vee BlockEclipse E934 Magnetic Vee BlockEclipse E934 Magnetic Vee Block
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
We are selling unique items for the home workshop like division plates that have 127 & 25 holes in them for direct indexing. We also stock some custom gears for the Myford lathes.
You can see more of our stuff at our web site here
Read more...
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...

For Sale: Grade 66 Nylon Bars

Thu 10th Apr '14

Advert ID: 18991

Materials
See all ads from Lee Wood
Details:
Still a few 18" lengths of Grade 66 Nylon Round Bars left and I am looking for a quick sale

Bars will have either 1 or both ends with saw marks

Size Qty
20mm 2
30mm 6
40mm 4
50mm 2

Will sell the lot for £65 which also includes the delivery cost.
Terms:
Price: £65.00
Postage: Free
Delivery Only
Contact:
Lee Wood
Worcester
WR4
UK
email

Information: Small Metric nuts and bolts.

Thu 10th Apr '14

Advert ID: 18990

Materials
Details:
Please can someone help me find a supplier of 1mm, 1.5mm, 2.5mm and 3mm hexagon head, steel nuts and bolts. Also has anyone a 1.5 inch diam 6 inches long piece of Phosphor Bronze which they are willing to part with for a reasonable price. This is required for making some bearings for a 1900's stationary engine.
Contact:
John Bullock
UK
email

For Sale: Myford Super7 lathe

Thu 10th Apr '14

Advert ID: 18989

Tools
See all ads from John Britton
Details:
Myford super7 on stand with gearbox and power cross feed. Chuck, faceplate, catch plate,handbooks etc.

In good condition.
Terms:
Price: £1,500.00
Collection Only
Contact:
John Britton
Grimsby
DN34
UK
01472 276910
email
Myford Super7 lathe

For Sale: Qualters & Smith 6" Power Hacksaw

Wed 9th Apr '14

Advert ID: 18987

Tools
Details:
Qualters & Smith 6" Power Hacksaw 3 Phase.

Ex school technical department unit so very little use for a machine built to last a lifetime.
- Very heavy cast construction with hydraulic lift and dampened lowering which has a speed control.
- Automatic motor stop and saw raise at end of cut.
- Adjustable stop and vice for mitre cuts. Sale includes 6 new blades.

Cash on collection welcome and insured delivery can be arranged nationwide, please enquire for a quote. Item is in Forfar, by Dundee.
- Any questions please ask.
Further ex school machinery available including Colchester Bantam Lathes, Wadkin Bandsaws, Table Saws and Belt & Disc Sanders, Planer Thicknessers, Gas Crucibles, Dust Extraction etc.
Terms:
Price: £300.00
Postage: £100.00
Collection or Post
Contact:
Trader
Duncan MacGregor
Dundee
DD8
UK
email
Qualters & Smith 6" Power HacksawQualters & Smith 6" Power Hacksaw

Wanted: 1/2hp 1425rpm foot mounted electric motor

Wed 9th Apr '14

Advert ID: 18982

General
Details:
Has anyone a small 1/2 hp single phase motor surplus to requirements? If so give me a mail with cost and location...
Contact:
Bob Foster
pontypool
np4
UK
email

Wanted: Steel Disc 4 1/4inch dia x 1/2 inch thick

Wed 9th Apr '14

Advert ID: 18977

Materials
See all ads from Peter Smithurst
Details:
greetings all. I am on the hunt again, this time for a steel disc a gnats over 4 inches dia to allow machining down to 4 inches and 1/2 - 9/16 inch thick. If I have to go up to 4.5 dia its not a great problem. Can anyone help please?

thanks in advance
Contact:
Peter Smithurst
Sheffield
S6
UK
email
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...

Wanted: Honda EU10i 230v Generator

Wed 9th Apr '14

Advert ID: 18976

General
Details:
Clean power generator wanted for campervan, either Honda EU10i or similar such as Clarke iG1000 maybe acceptable.
Please advise if you have these or something similar stating condition, asking price and location.
Contact:
Marcus
Kings Lynn
UK
email

For Sale: Mathieson Plane

Wed 9th Apr '14

Advert ID: 18975

Tools
Details:
Mathieson rebate (rabbit) plane in nice condition.
Prefer view and collect but could be sent courier (quicker and better than post) for about £11.
There are Mathieson fakes around but the maker's mark appears to pass the usual tests for being genuine.
Open to sensible offers.

Two USB HP scanners suitable for XP and Vista but not Win 7 or 8.x Also OK for SANE under Linux. Say £5 each plus post if needed (prefer collection)
Terms:
Price: Multiple
Collection or Post
Contact:
Bob
Camberley
GU46
UK
email
Mathieson PlaneMathieson PlaneMathieson PlaneMathieson Plane

Wanted: 7 1/4" 'Paddington' Safety Valve Bonnet

Wed 9th Apr '14

Advert ID: 18973

Materials
Details:
Hi ,
Having spent 2+days working on the safety valve /top-feed bonnet for my 15XX, a momentary over-heat with the oxy flame on a bead and it was ********* !!
I cannot save it because it's to be polished brass, silver-soldered on patches are NOT an option!
Has anyone got a casting for the bonnet in their rummage box under the bench?
Reeves say a 10week wait for a replacement.
Can anyone that reads this and knows of one please get in touch. Many thanks.
Stuart
Contact:
Stuart
Newcastle-u-Lyme
ST5
UK
01782 767587
email

Wanted: Replacement Gear

Tue 8th Apr '14

Advert ID: 18970

Tools
Details:
Looking for a replacement gear for an Elliot Milmore Super Ten milling machine gear box, the same gear box was fitted to the Elliot Omnimill 1100 and sometimes the 1000 model, the part wanted is Elliot no D-1-513-524-00, its a 38t & 42t gear cluster.
I have been lucky before with requests on this brilliant site, I wonder!
Contact:
Ken Stoat
Cardiff
CF39
UK
email
Replacement GearReplacement GearReplacement Gear

For Sale: 1 HP Inverter + Pendant + 3/4 HP Motor Package

Tue 8th Apr '14

Advert ID: 18967

Tools
Details:
Set up ready to go Motor and Inverter Package.
Includes a 0.55 Kw Brook Hansen motor new and unused a 1 HP IMO Cub C75 Inverter in excellent condition and a pendant control box.
Suitable for Myford, Boxford and similar lathes or small milling machine etc.
Collection Preferred but will post if necessary.
£200 + £20 P&P.
Terms:
Price: £200.00
Postage: £20.00
Collection or Post
Contact:
Gavin Oseman
Malvern
WR14
UK
01684574966
email
1 HP Inverter + Pendant + 3/4 HP Motor Package

For Sale: 7.25" Hercules

Tue 8th Apr '14

Advert ID: 18966

Models
Details:
I am selling my unfinished 0-4-0 7.25 inch gauge Hercules
It is an air running chassis and can be seem running on request, which is slightly different to your usual hercules design as it has hackworth valve gear instead of walschaerts.
It is roughly 40cm wide and 92cm long. It has been made to a good standard and is a great start for someone looking for a new project.
Can be delivered to buyer for cost of fuel.
Any questions please feel free to contact me .

Any Sensible Offers WELCOME!
Terms:
Price: £975.00
Collection or Delivery
Contact:
Adam
stoke-on-trent
ST6
UK
07876287864 or 01782 937351
email
7.25" Hercules7.25" Hercules7.25" Hercules
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...
We are selling unique items for the home workshop like division plates that have 127 & 25 holes in them for direct indexing. We also stock some custom gears for the Myford lathes.
You can see more of our stuff at our web site here
Read more...

For Sale: Locomotive castings

Tue 8th Apr '14

Advert ID: 18965

Models
Details:
Selling on behalf of a friends widow:-
Bantam Cock.
Assembled main and tender frames.Some slight surface rust in places
Main horn castings, these will need to be redrilled after machining.
Tender horns, axle boxes and spring castings.£110 plus postage
Simplex dome and saddle castings £30 plus postage
Doris cylinder block and end cover castings in cast iron.£30 plus postage.
A collection of unidentified castings comprising chimney, dome, safety valve cover and frame spacers.offers plus postage.
Terms:
Price: Multiple
Collection or Post
Contact:
Brian Barrow
Chorley Lancs
BL6
UK
01942832571
email
Locomotive castingsLocomotive castingsLocomotive castings

For Sale: Sieg C3 Faceplate still boxed

Mon 7th Apr '14

Advert ID: 18960

Tools
Details:
Bought but never used and I am having a bit of a clear out it is time to be realistic.
Ten Pounds buys it and I can pop it in the post or you can collect.
Terms:
Price: £10.00
Postage: Free
Post Only
Contact:
Lee Brett
Manchester
UK
email

For Sale: Emco toolpost / Jacobs 32 chuck

Mon 7th Apr '14

Advert ID: 18959

Tools
Details:
One used EMCO qctp toolpost size approx. 45mm x 45mm x 40mm high. Approx 42mm between centres of verticals, 11.5mm bore. Good condition. only £12 Can post to UK for £3

One boxed Jacobs USA 0-3/8" model No. 32. Taper mount (not sure size (14mm at outer end) Looks unused with a few storage type marks. Complete with key. Only £12 can post uk £3
Terms:
Price: Multiple
Post Only
Contact:
Nigel
Exeter
EX10
UK
email
Emco toolpost /  Jacobs 32 chuckEmco toolpost /  Jacobs 32 chuck

Wanted: Booster rotary converter 3hp

Mon 7th Apr '14

Advert ID: 18958

Tools
Details:
Im looking for a booster a3 rotary converter or bigger to run my new cnc lathe if anyone has or knows of one for sale it would be much apreciated
Contact:
Mick robinson
Leicester
Le67
UK
07712 659407
email

For Sale: Taylor multimeter

Mon 7th Apr '14

Advert ID: 18957

General
Details:
Free to whoever would like it, an old Taylor multimeter. I am clearing some items from my workshop and this is one of them.
I would prefer collection as it is a bit fragile to send and would not survive the post/courier.
It all works but could do with some new batteries as the existing ones are a bit tired.
Ian.
Terms:
Price: Free
Collection Only
Contact:
Ian Bottle
Dover
CT16
UK
email
Taylor multimeter

Information: upsetting

Mon 7th Apr '14

Advert ID: 18956

General
See all ads from Peter Smithurst
Details:
greetings all.

I am hoping someone out there might be able to point me in the right direction of someone who is able to upset some rods for me. Basically, I need the ends of some 5mm mild steel rod upsetting to about 7.6mm / 0.3 inches diameter for approx a 1.125 inch length. (see drawing. Finished overall length after upsetting about 17.5 inches. Ten of these rods are needed initially but I may need some more in the future but am not talking vast quantities. I can probably make a die, depending on what is needed, if it will help get the job done. Can anyone help with this? I realise I could machine some rod down to the small diameter but its a long length and would prefer them forged if possible and not too expensive!

fingers crossed and thank you in advance
Contact:
Peter Smithurst
UK
email
upsetting
I offer a casting service specialising in small batches and one offs, producing good quality castings in variours
alloys using the lost wax process, ideal for the model engineer and restorer.
Any enquiries and more details can be found on my web site. www.abbeycasting.co.uk
Read more...
Always wanted, Myford ML7 & Super 7 or ML10 Lathes. The good, the bad or the ugly. Read more for contact details.
Read more...
Call Steve Cox on 07836 736496 or email landylift@aol.co.uk for quote. Machinery removal and transportation service based in West Yorkshire, UK coverage. Crane can lift 1100kg at 1.2 metres and 420kg at 4.0 metres. Vehicle can carry 1100kg on 10 foot x 7 foot flatbed.
Now using ...
Read more...

Wanted: small Eclipse or simalar box-cube

Sun 6th Apr '14

Advert ID: 18955

Tools
Details:
does anyone have a small box-cube either Eclipse or other make, they used to make these but I havn't seen and of the forign imported makes doing cubes only angle plates and adjustable angle plates.
Contact:
John Burridge
south Oxford
OX10
UK
01491-833009
email

Wanted: Welding in the construction and maintenance of aircraft

Sun 6th Apr '14

Advert ID: 18952

Books/Magazines
Details:
Does anybody have a copy of this book/booklet they wish to sell or could copy for me? Published 1943, Author James Cowie

Thanks
Contact:
Andrew
Brighton
UK
email

Wanted: engravers sandbag and any gravers for use with copper sheet

Sun 6th Apr '14

Advert ID: 18951

Tools
Details:
any retired engravers wishing to part with there old tools please contact thankyou
Contact:
david spicer
bridgwater
ta7o
UK
01278691264
email

Information: CNC Controlled Wood/Metal Router

Sun 6th Apr '14

Advert ID: 18950

CNC
See all ads from John Russell
Details:
As I have never worked with a CNC controlled machine.
Does anybody know if you can get a USB controlled CNC wood Router with a table size of about 12" x 24". Also can you import a line drawing directly into the CNC computer program, so that I can scale it and then cut it on to a sheet of MDF 6mm thick. I do not have access to a Windows computer with a parallel port on it. Thanks.
Contact:
John Russell
UK
01255861232
email

For Sale: Burnerd 35B 4-jaw chuck

Sun 6th Apr '14

Advert ID: 18949

Tools
Details:
One used 4" 4-jaw independent chuck by Burnerd precision chucks, Model No. 35B made in England. Little or no signs of use. Also comes with a cast 7/8" x 9 tpi removable backplate, and chuck key, boxed.

Can pack and post to UK for £5.40
Terms:
Price: £58.00
Postage: £5.40
Post Only
Contact:
Nigel
Exeter
EX10
UK
email
Burnerd 35B 4-jaw chuck

For Sale: Centec 2a Horizontal Milling Machine

Sun 6th Apr '14

Advert ID: 18948

Tools
Details:
Centec 2a horizontal milling machine - no vertical attachment is present. It is used but has been meticulously looked after.
Single phase motor, Chrome index thimbles, all speeds sound smooth and there is 0.005" backlash in the y screw and 0.020" in the x axis due to a little half-nut wear. The slides are close fitted and not tight at the extremes of travel.

Also has a box of cutters included.

Please email me for more photographs.

Collection only; it can be dismantled quite easily and will go in a small van or a large estate

It is in the workshop of a friend's late father's estate on whose behalf I am advertising it. Collection from Ealing will have to be by appointment at a weekend when my friend could be present.

Many thanks for looking.
Terms:
Price: £450.00
Collection Only
Contact:
Peter Watkinson
Ealing, London.
W13
UK
01460 63943
email
Centec 2a Horizontal Milling MachineCentec 2a Horizontal Milling Machine


STEAMPLATES produce high quality polished and enamelled name plates  etc. in Brass and Aluminium from 1" x 1/2" up to 96" x 48".  Reproduction steam related name and other plates can be made to FULL  SCALE.
We also ...
Read more...
Want to put your advert on the site like this one. We get over 25,000 visitors a month to these pages and your name could be right here at the top of the listings. If you haven't got a web site that's no problem, we can just put the ...
Read more...
Hi we are the people that host this wonderful site and want to offer our services to members of clubs and groups that would like their own presence on the world wide web. We have special unlimited space and transfer for only £40 £33 a year for clubs and ...
Read more...

For Sale: Steel Spur Gears

Sun 6th Apr '14

Advert ID: 18944

Materials
Details:
2 Off 50T 24DP
1 Off 32T 2.5 Mod
1 off 64T 2.5 Mod
16 Off 30T 2 Mod
1 Off 64T 2 Mod
1 Off 71/2" length 2 Mod rack
8 Off 18T 8DP

30 items in all for £20
Terms:
Price: £1.00
Collection Only
Contact:
R Racey
Peterborough
PE7
UK
01733 245317
Steel Spur Gears

For Sale: 9" Open side Angle Plate

Sun 6th Apr '14

Advert ID: 18943

Tools
Details:
A cast iron open side 9"x9"x9" angle plate,old enough to be imperial sizes but in good condition, no dings, one slot has slightly crushed inside edges, probably due to someone tightening a nut without a washer under it.
Bare weight is 14.5 kg so it just sneaks under the courier limit so long as packaging is minimal.Postage is £10 if it's in the 15 kg limit. Collection is also possible from South Cheshire
Terms:
Price: £45.00
Postage: £10.00
Collection or Post
Contact:
Bob Dodds
Crewe
CW3
UK
email
9" Open side Angle Plate

Information: wolf tool post grinder internal spindle

Sun 6th Apr '14

Advert ID: 18941

Tools
Details:
I have had a wolf tool post grinder for some time and wanted to do some internal grinding,so I made an internal spindle but I have recently got hold of a handbook which shows a lock nut on the spindle to retain the dust cap/end cap.

I wonder if anyone has an internal spindle if they could measure the thread detail on the spindle and sketch up the lock nut for me please.
Contact:
john burridge
UK
01491-833009
email

For Sale: warco 1330 lathe

Sun 6th Apr '14

Advert ID: 18940

Tools
Details:
continuing to clear my fathers workshop
complete as purchased with all tooling from warco ,look on warco web site this lathe is 7 years old in September it has 5 c collect chuck ,18 imperial collects in a rack ,200mm h b w 4 jaw self centring chuck +set jaws ,supplied by r,g d, shop made handle ,shop made boring table ,,2 auto tailstock chucks 1 @ o to 12mm ,1 @ o to 20mm ,75 mm tail stock 3 jaw self centring chuck
tail stock turret shop made die holders & tapping tools ,1 2 3 5 mt sleeves ,lots of other tooling + lathe tools ,has warco q c tool post +5 holders ,1 boring bar holder ,full set of change gears
Terms:
Price: £2,200.00
Collection Only
Contact:
mark
romford
rm12
UK
07999922135

For Sale: NEW Argon gas regulator + disposable bottle regulator

Sun 6th Apr '14

Advert ID: 18939

Tools
Details:
New disposable bottle regulator as used on bottles supplied by Toolstation etc. £10 P&P £2
New 2 stage argon regulator i.e. tigs, migs etc. two gauges
Neither have ever been used
Can post or you can collect
Any questions or photos please email or phone
Terms:
Price: £30.00
Postage: £5.00
Collection or Post
Contact:
Trevor
Bexhill
TN39
UK
07767297916
email

Wanted: Electric motor

Sat 5th Apr '14

Advert ID: 18937

Tools
Details:
240v 1hp 1400 speed
Contact:
Terry gibbons
Newport
Np44
UK
01633485811


Disclaimer

Any adverts on the homeworkshop.org.uk site are posted by individuals acting in their own right and do not necessarily reflect the views of the administrators.

By using the site, individual posters agree not to post any defamatory or libellous posts and to accept full responsibility for the items they post.

We do not warrant that the servers that make this website available will be error, virus or bug free and you accept that it is your responsibility to make adequate provision for protection against such threats.

In no event will homeworkshop.org.uk be liable for any incidental, indirect, consequential or special damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, goodwill, data, information, income, anticipated savings or business relationships, whether or not advised of the possibility of such damage, arising out of or in connection with the use of this website or any linked websites.

We do not sell, hire, share or give out your email address.

The software that runs this site (Joomla!) may transfer a temporary cookie so it can keep track of what it’s doing. As it’s temporary it maybe deleted when you leave here.

So that we can measure the popularity of posts, where people come from and other general statistics, we use Google Analytic’s. It may store cookies to track new  and repeat visitors. It does not have any detail on who you are.

Advertising links can use cookies to track from which site you came from. Some of those will be for affiliate links where cookies are used in tracking and payment systems.

All copyrights, trademarks and intellectual property rights remain with the owners unless owned or licensed by the homeworkshop.org.uk site.

This disclaimer notice shall be interpreted and governed by English law, and any disputes in relation to it are subject to the jurisdiction of the courts in England and Wales. 

 

Donate

Want to help us fund the site and time spent by the people behind it then use the button below.

We are not a registered charity so you can't claim it back but it helps pay for the costs of improving the features.

You can also help by looking at the advert on the side menus as we get paid for these BUT please only look at adverts you are interested in, you never know you might find something you never knew existed.